Clippers
Andis Engine frame screw for AGC, AGC2, AGC2 Super Speed, AGCB clippers
Engine frame screw for Andis AGC, AGC2, AGC2 Super Speed, AGCB clippers.
€0,76
Wahl Complete housing for Wahl KM5 clipper
Looking for spare/service parts for the Wahl KM5 clipper? Make your selection based on the service diagram of the clipper. Tip: Available parts are visible after expanding the list above the Add to Cart button. GroomerShop.pl is an authorized warranty and post-warranty service for Wahl clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code Product Name 0010 SRV-W-1260-7040 Housing for Wahl KM5 clipper 0020 SRV-M-1250-7020 Screw set for Wahl KM5 model 0030 SRV-M-1250-7000 Pivot for Wahl KM5 clipper 0040 SRV-M-1250-7040 Motor bracket for Wahl KM5 clipper 0050 SRV-M-1250-7070 Motor for Wahl KM5 clipper 0060 SRV-W-1260-7020 PCB electronics for Wahl KM5 clipper 0070 SRV-M-1245-7030 Blade hinge for Wahl KM5 clipper - SRV-M-1225-7180 Blade latch for Wahl KM5 clipper 0080 W-1260-7010 Blade snap for Wahl KM5 model 0090 W-1260-7000 Power supply with 4m cable for Wahl KM5 0100 SRV-M-1250-7080 Clip for Wahl KM5 clipper - SRV-M-1221-7510 Snap-On blade screw for Wahl KM5 SRV-M-1245-7005 Blade pressure spring for Wahl KM5
€25,25
Oster Oster Snap-On Blade Screw
Oster Snap-On Blade Screw (Oster Cryogen-X Series).
€0,50
Moser Moser Professional Grease - professional lubricant / maintenance paste for clippers
Original Moser paste for the maintenance of moving parts in clippers and trimmers. It is ideal for preventing jamming and reducing noise during the operation of components such as: rocker, gearbox, and eccentric. Regular use of the grease extends the lifespan of the moving parts of the clippers. Suitable for any clipper with a rotary motor. Not to be used for blade maintenance. Application method: apply a small amount of paste at the contact points of the moving parts of the clipper. Before maintenance, thoroughly clean it from any residue of old paste. It is recommended to use the grease at least once every 6 months.
€3,79
Show Tech Show Tech Universal Holder for Clippers - wall-mounted holder for clippers
Show Tech Universal Holder for Clippers is a clipper holder that fits most corded and cordless clippers: Andis, Aesculap, Moser, Oster, Wahl, etc. Useful in every grooming salon, its use prevents the clipper from falling off the table. Very simple wall mounting system. Ideal for places where you need to have the clipper always at hand. Made of high-quality plastic, available in 3 colors.
€10,27 - €12,69
Heiniger Heiniger Saphir Vet - professional cordless clipper for veterinarians with blade - rechargeable batteries
High-quality Swiss SAPHIR Vet clipper by Heiniger, dedicated to veterinarians. Professional, cordless pet grooming clipper. Very quiet, lightweight, and sturdy construction. Includes a #40 blade with a cutting length of 0.25mm. Among professionals, this model is regarded as the best cordless clipper for grooming. Included: clipper with #40 blade (0.25mm), blade cleaning brush, oil, and carrying case. Technical specifications: motor 35W, speed approximately 2650 strokes/min, cable 3m, blade width 40mm. The clipper is compatible with Snap-On blades from various manufacturers: Andis, Oster, Moser, Wahl, Thrive, Kim Laube, Aesculap, Geib, and others with this type of attachment.
€429,21
Moser Power cord for Moser Rex 1230 clipper
Are you looking for spare/service parts for the Moser Rex 1230 clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Moser clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown in the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1020 | SRV-M-1230-7471 | Blade bed for Moser Rex 1230 1030 | SRV-M-1230-7720 | Blade guide for Moser Rex 1230 1040 | SRV-M-1230-7060 | Adjustment lever for Moser Rex 1230 1050 | SRV-M-1230-7730 | Oscillating rocker for Moser Rex 1230 1060 | SRV-M-1586-7020 | Motor for Moser Rex 1230 1070 | SRV-M-1230-7690 | Power cord for Moser Rex 1230 1080 | SRV-M-1230-7072 | Switch for Moser Rex 1230 1090 | SRV-M-1230-7760 | Lower housing for Moser Rex 1230 / 1233 1100 | SRV-M-1230-7555 | Upper housing for Moser Rex 1230 / 1233 1110 | SRV-M-1230-7560 | Connector for Moser Rex 1230 1120 | SRV-M-1230-7190 | Mounting caps for Moser Rex 1230 1130 | SRV-M-1230-7035 | Adjustment mechanism for Moser Rex 1230
€12,63
Andis Replacement motor for Andis Pulse ZR I/II clippers
Original, interchangeable motor for Andis Pulse ZR I/II clippers.
€88,35
Aesculap Aesculap Favorita II - professional corded clipper for grooming dogs and other animals, running, without blade
Aesculap Favorita II is the most well-known professional clipper on the market. This model has been recognized for years for its reliability, durability, and precision. The clipper is motorized, single-speed, and practically indestructible. It operates quietly and without vibrations. Recommended for grooming all pets. The motor comes with a 5-year warranty. The clipper is sold without a blade. Blades for this model are available in sizes from 0.05 mm to 16 mm. The set includes: Favorita II clipper, a bottle of oil for blade lubrication, and a case for transport and storage. The clipper does not come with a blade in the factory set.
€403,73
Moser Switch for Moser 1245 MAX Wahl KM2 Clipper
Original switch for Moser 1245 MAX 45 clippers. GroomerShop.pl is an authorized warranty and post-warranty service for Moser/Wahl clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€7,58
Heiniger Heiniger Style Midi Clipper Charger Power Supply
Are you looking for spare/service parts for the Heiniger Style Midi clipper? Make your selection based on the service diagram of the clipper. Tip: Available parts are visible after expanding the list above the Add to Cart button. GroomerShop.pl is an authorized warranty and post-warranty service for Heiniger clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 | SRV-HG-707-220 | Upper housing for Heiniger Style Midi clipper 2 | SRV-HG-707-221 | Switch for Heiniger Style Midi clipper 3 | SRV-HG-707-222 | Complete motor for Heiniger Style Midi clipper 4 | SRV-HG-707-223 | PCB electronics for Heiniger Style Midi clipper 5 | SRV-HG-707-224 | Battery for Heiniger Style Midi clipper 6 | SRV-HG-707-225 | Plastic attachment for Heiniger Style Midi clipper 7 | SRV-HG-707-226 | Lower housing for Heiniger Style Midi clipper 8 | HG-707-260 | Blade for Heiniger Style Midi clipper 9 | SRV-HG-707-227 | Adjustment knob for Heiniger Midi clipper 10 | SRV-HG-707-228 | Parts set for Heiniger Style Midi clipper 11 | SRV-HG-707-229 | Charger without power supply for Heiniger Style Midi 12 | SRV-HG-707-239.EU | Power supply for the charger for Heiniger Style Midi clipper 13 | SRV-HG-707-233 | Attachment holder for Heiniger Style Midi
€65,62
Heiniger Heiniger Opal Special Edition Clipper - professional, two-speed, quiet cordless clipper with a brushless motor and an accumulator blade.
Opal Special Edition is the latest model of the cordless clipper from the Heiniger brand, featuring new and improved electronics. Now even more durable and quieter, thanks to the use of a brushless motor. Two speed settings allow you to adjust the speed for every type of coat and job. The ergonomic and slim design fits perfectly in the hand and provides maximum comfort during use. The lithium-ion battery with a built-in battery level indicator allows for continuous operation for 4 hours! (The battery has no memory effect, allowing it to be recharged at any time.) Noticeably quieter than other clippers of its kind, the Opal enhances the comfort of every user and reduces stress for animals. It can handle every type of coat: from thick, woolly undercoats to fine hair. It is compatible with all Snap-On blades available on the market. Packaged in the manufacturer's box along with a #10 blade (1.5 mm) and accessories. Recommended for pet grooming salons, veterinary clinics, and breeding. Technical specifications of Heiniger Opal: weight of the clipper with blade and battery: 415g, weight of the battery: 127g, speed: 2600/3100 strokes/min, operating time: up to 4h, charging time: 80min, noise level:
€457,05
Heiniger Heiniger Saphir, Opal Blade Hinge
Blade hinge for Heiniger Saphir, Opal clippers.
€13,89
Aesculap Spare battery for Aesculap GT200, GT210, GT300 clippers
Original spare battery for Aesculap clippers. The battery is compatible with the following clipper models: Aesculap Favorita CL (GT200) Aesculap Favorita CL Hybrid (GT208) Aesculap FAV 5 CL (GT306) Aesculap FAV 5 Hybrid (GT308) Technical specifications: battery type: lithium-ion capacity: 1200 mAh charging voltage: 8.4 V battery runtime: 60 minutes battery charging time: 50 minutes
€100,98
Aesculap Aesculap Torqui Econom - torque wrench for precise adjustment of Aesculap clipper blades for cattle and horses
Aesculap Torqui is a torque wrench designed for precise adjustment of the cutting head pressure in Aesculap clippers. With it, you can easily set the appropriate and precise blade pressure in your clipper. It is small, handy, and easy to use. It is intended for all cutting heads of Bonum and Econom clippers for cattle and horses. Advantages of the Aesculap Torqui wrench: precise blade pressure adjustment increases the lifespan of the cutting head suitable for inexperienced users handy and maintenance-free tool compatible with all Bonum and Econom cutting heads All cutting heads for cattle and horses can also be additionally equipped with
€50,49
Heiniger Heiniger Opal 2 - Speed Brushless Clipper NEW - professional, two-speed, quiet cordless clipper with a brushless motor - two batteries
Opal is the latest model of cordless clippers from the Heiniger brand. Now even more durable and quieter, thanks to the use of a brushless motor. Two speeds allow you to adjust the speed to every type of coat and type of work. The ergonomic and slim design fits perfectly in the hand and ensures maximum comfort during use. The lithium-ion battery with a built-in battery level indicator allows for continuous operation for 4 hours! (The battery has no memory effect, so we can recharge it at any time.) Noticeably quieter than other clippers of this type, Opal enhances the comfort of every user and reduces stress for animals. It can handle every type of coat: from thick, woolly undercoats to fine hair. It is compatible with all Snap-On blades available on the market, packaged in the manufacturer's box along with a #10 blade (1.5 mm) and accessories. Recommended for pet grooming salons, veterinary clinics, and breeding. Technical specifications: weight of the clipper with blade and battery: 415g, weight of the battery: 127g, revolutions: 2600/3100 strokes/min, working time: up to 4h, charging time: 80min, noise level:
€492,34
Heiniger Complete housing for Heiniger Saphir clipper
Are you looking for spare/service parts for the Heiniger Saphir clipper? Make your selection based on the service diagram of the clipper. Tip: Available parts are visible after expanding the list above the Add to Cart button. GroomerShop.pl is an authorized warranty and post-warranty service for Heiniger clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown in the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 | SRV-HG-707-831 | Housing for Heiniger Saphir clipper 2 | HG-707-771 | Battery for Heiniger Saphir clipper 3 | HG-707-800-21 | Motor for Heiniger Saphir clippers 4 | HG-707-833 | PCB electronics for Heiniger Saphir clippers 5 | HG-707-855 | Rubber seal for Heiniger Saphir clipper 6 | HG-707-847 | Rocker for Heiniger Saphir clippers 7 | HG-707-848 | Rocker seal for Heiniger Saphir clipper 8 | SRV-HG-707-856 | Seeger ring Ø 3.2 for Heiniger Saphir clipper 9 | SRV-HG-707-886 | Washer Ø 4x0.5 for Heiniger Saphir clipper 10 | HG-707-800-20 | Gear with ball bearing for Heiniger Saphir clipper 11 | HG-707-557 | Large housing screw (KA 3x16) for Heiniger Saphir clipper 12 | HG-707-854-1 | Blade hinge for Heiniger Saphir clipper 13 | HG-707-800-25/A | Blade latch for Heiniger Saphir clippers 14 | SRV-HG-707-846 | Small housing screw (KA 30x8) for Heiniger Saphir clipper 15 | SRV-HG-707-891 | Blade pressure spring for Heiniger Saphir clipper 16 | SRV-HG-707-892 | Blade guide for Heiniger Saphir clipper 17 | SRV-HG-707-890 | Blade hook for Heiniger Saphir clipper 18 | SRV-HG-707-893 | Mounting screw 3.5x4mm for Heiniger Saphir clipper 19 | SRV-HG-707-827 | Charger PCB electronics for Heiniger Saphir clipper 20 | SRV-HG-707-668.EU | Charger power supply for Heiniger Saphir clipper 21 | SRV-HG-707-822 | Charging station for Heiniger Saphir clipper 22 | HG-707-720 | Power supply for Heiniger Saphir clippers
€25,25
Aesculap Carbon brush for Aesculap FAV5, Favorita II clippers
Original carbon brush for Aesculap FAV5, Favorita II clippers. The price is for 1 piece; to replace the brushes, you need to purchase two pieces. GroomerShop.pl is an authorized warranty and post-warranty service for Aesculap clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€3,79
Heiniger Heiniger Clutch Sleeve for Clippers
Are you looking for spare/service parts for the Heiniger Delta 3 clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Heiniger clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 | SRV-HG-707-150 | Upper housing for Heiniger Delta 3 clipper 2 | SRV-HG-707-030 | Switch for Heiniger Delta 3 clipper 3 | SRV-HG-707-050 | Switch lock for Heiniger Delta 3 clipper 4 | SRV-HG-707-053 | Air filter for Heiniger Delta 3 clipper 5 | SRV-HG-707-060 | 240V motor for Heiniger Delta 3 clipper 6 | SRV-HG-707-062 | Motor stator for Heiniger Delta 3 clipper 7 | SRV-HG-707-064 | Rotor for Heiniger Delta 3 clipper 8 | SRV-HG-707-066 | PCB electronics for Heiniger Delta clipper 9 | SRV-HG-707-070 | Carbon brush for Heiniger Delta clipper 10 | SRV-HG-707-072 | Brush spring for Heiniger Delta 3 clipper 11 | SRV-HG-701-636 | Rotor bearing for Heiniger Delta clipper 12 | SRV-HG-707-074 | Brush holder for Heiniger Delta 3 clipper 13a | SRV-HG-707-075 | Mounting screw M3x50 for Heiniger Delta 3 clipper 13b | SRV-HG-707-076 | Square nut M3 for Heiniger Delta 3 clipper 13c | SRV-HG-707-077 | Lock washer M3 for Heiniger Delta 3 clipper 14 | SRV-HG-707-080 | Wire bend for Heiniger clippers 15 | SRV-HG-707-055 | Power cable for Heiniger clippers 16 | SRV-HG-707-082 | Cable holder for Heiniger clipper 17 | SRV-HG-706-524 | Circlip size 6 for Heiniger Xplorer clippers 18 | SRV-HG-707-084 | Gear for Heiniger clippers 19 | SRV-HG-707-115 | Head housing for Heiniger Delta clipper 20 | HG-706-518 | Arm/plate of the yoke for Heiniger clippers 21 | SRV-HG-706-514 | Yoke sleeve for Heiniger clippers 22 | SRV-HG-706-520 | Screw for Heiniger clippers M5 x 14 24 | SRV-HG-706-511 | Pressure arm for Heiniger clipper 25 | SRV-HG-706-525 | Guide screw M3 X 6 for Heiniger clippers 26 | SRV-HG-707-087 | Lever guide for Heiniger Delta clipper 27 | SRV-HG-706-521 | Blade mounting screw for Heiniger Delta clipper 28 | SRV-HG-707-088 | Ring/seger size 3.73mm for Heiniger Delta clipper 29 | HG-706-507 | Yoke block for Heiniger Delta clippers 30 | SRV-HG-707-089 | Crankshaft for Heiniger Delta clippers 31 | SRV-HG-707-000-31 | Crank sleeve for Heiniger Delta clipper 32 | SRV-HG-706-517 | Pressure spring for Heiniger Delta clippers 33 | SRV-HG-707-108 | Blade pressure sleeve for Heiniger Delta clipper 34 | SRV-HG-707-114 | Spacer screw for Heiniger Delta clipper 35 | SRV-HG-707-140 | Switch cover for Heiniger Delta clipper 36 | SRV-HG-707-093 | Complete head for Heiniger Delta clipper 37 | SRV-HG-707-094 | Mounting screws (KA 40 x 16) for Heiniger Delta 38 | SRV-HG-701-635 | Rotor bearing for Heiniger Delta clipper 39 | SRV-HG-701-637 | Pressure ring for Heiniger Delta clippers 40 | SRV-HG-706-523 | Screw for Heiniger Delta clippers M4 X 10 41 | SRV-HG-707-160 | Lower housing for Heiniger Delta 3 clipper
€2,53
Andis Andis - oil seal for AGRC, AGR+, AGC2, AGC Super clippers, etc.
Oil seal for Andis AGRC, AGR+, AGC2, AGC 2 Super clippers, etc.
€1,51
Aesculap Engine ring for Aesculap clippers - 23x3.6mm
Looking for spare/service parts for the Aesculap Favorita CL (GT206) clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Andis clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown in the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 | AE-GT201 Spare battery for Aesculap Favorita CL (GT206) clippers 2 | - Lower housing for Aesculap Favorita CL (GT206) clipper 3 | - Upper housing for Aesculap Favorita CL (GT206) clipper 4 | - Power switch button for Aesculap Favorita CL (GT206) clipper 5 | SRV-AE-GT200249 Switch contact for Aesculap Favorita CL (GT206) clippers 6 | SRV-AE-GT200245 Switch guide for Aesculap Favorita CL (GT206) clippers 7 | SRV-AE-GT200809 Foam seal for Aesculap Favorita CL (GT206) clippers 8 | - Blade lock for Aesculap Favorita CL (GT206) clippers 9 | SRV-AE-GT300880 Rocker for Aesculap Favorita CL (GT206) clipper 10 | - Safety washer for Aesculap Favorita CL (GT206) clipper 11 | AE-GT104315 Blade bed for Aesculap Favorita CL (GT206) clippers 12 | SRV-AE-TA013499 M3x16 housing screw for Aesculap Favorita CL (GT206) clipper 13 | - Blade screw for Aesculap Favorita CL (GT206) clipper 14 | - Blade pressure spring for Aesculap Favorita CL (GT206) clipper 15 | - Motor for Aesculap Favorita CL (GT206) clipper 16 | SRV-AE-GT200850 PCB electronics for Aesculap Favorita CL (GT206) clipper 17 | SRV-AE-TA003820 Safety ring for rocker for Aesculap Favorita CL (GT206) clipper 23 | SRV-AE-TA004663 Electronics plate screw for Aesculap Favorita CL (GT206) clipper 24 | SRV-AE-GT300305 Cap for Aesculap Favorita CL (GT206) clipper 25 | SRV-AE-TA013521 Motor ring 23x3.6mm for Favorita CL (GT206) clipper 26 | SRV-AE-TA013522 Motor ring 30x2.65mm for Aesculap Favorita CL (GT206) clipper
€2,53
Heiniger Heiniger Delta, Progress Clipper Lead
Are you looking for spare/service parts for the Heiniger Delta 3 clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Heiniger clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown in the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 SRV-HG-707-150 | Upper housing for Heiniger Delta 3 clipper 2 SRV-HG-707-030 | Switch for Heiniger Delta 3 clipper 3 SRV-HG-707-050 | Switch lock for Heiniger Delta 3 clipper 4 SRV-HG-707-053 | Air filter for Heiniger Delta 3 clipper 5 SRV-HG-707-060 | 240V motor for Heiniger Delta 3 clipper 6 SRV-HG-707-062 | Motor stator for Heiniger Delta 3 clipper 7 SRV-HG-707-064 | Rotor for Heiniger Delta 3 clipper 8 SRV-HG-707-066 | PCB electronics for Heiniger Delta clipper 9 SRV-HG-707-070 | Carbon brush for Heiniger Delta clipper 10 SRV-HG-707-072 | Brush spring for Heiniger Delta 3 clipper 11 SRV-HG-701-636 | Rotor bearing for Heiniger Delta clipper 12 SRV-HG-707-074 | Brush holder for Heiniger Delta 3 clipper 13a SRV-HG-707-075 | Mounting screw M3x50 for Heiniger Delta 3 clipper 13b SRV-HG-707-076 | Square nut M3 for Heiniger Delta 3 13c SRV-HG-707-077 | M3 securing washer for Heiniger Delta 3 14 SRV-HG-707-080 | Wire bend for Heiniger clippers 15 SRV-HG-707-055 | Power cable for Heiniger clippers 16 SRV-HG-707-082 | Cable holder for Heiniger clipper 17 SRV-HG-706-524 | Seeger ring size 6 for Heiniger Xplorer clippers 18 SRV-HG-707-084 | Gear for Heiniger clippers 19 SRV-HG-707-115 | Head housing for Heiniger Delta clipper 20 HG-706-518 | Arm/plate of the yoke for Heiniger clippers 21 SRV-HG-706-514 | Yoke sleeve for Heiniger clippers 22 SRV-HG-706-520 | Screw for Heiniger clippers M5 x 14 24 SRV-HG-706-511 | Pressure arm for Heiniger clipper 25 SRV-HG-706-525 | Guide screw M3 X 6 for Heiniger clippers 26 SRV-HG-707-087 | Lever guide for Heiniger Delta clipper 27 SRV-HG-706-521 | Blade mounting screw for Heiniger Delta clipper 28 SRV-HG-707-088 | Ring/seger size 3.73mm for Heiniger Delta clipper 29 HG-706-507 | Yoke block for Heiniger Delta clippers 30 SRV-HG-707-089 | Crankshaft for Heiniger Delta clippers 31 SRV-HG-707-000-31 | Crank sleeve for Heiniger Delta clipper 32 SRV-HG-706-517 | Pressure spring for Heiniger Delta clippers 33 SRV-HG-707-108 | Blade pressure sleeve for Heiniger Delta clipper 34 SRV-HG-707-114 | Spacer screw for Heiniger Delta clipper 35 SRV-HG-707-140 | Switch cover for Heiniger Delta clipper 36 SRV-HG-707-093 | Complete head for Heiniger Delta clipper 37 SRV-HG-707-094 | Mounting screws (KA 40 x 16) for Heiniger Delta 38 SRV-HG-701-635 | Rotor bearing for Heiniger Delta clipper 39 SRV-HG-701-637 | Pressure ring for Heiniger Delta clippers 40 SRV-HG-706-523 | Screw for Heiniger Delta clippers M4 X 10 41 SRV-HG-707-160 | Lower housing for Heiniger Delta 3 clipper
€27,77
Wahl Blade latch for Moser Max Wahl KM5, KM10, KM Cordless clippers
Blade latch for Moser Max 50, Wahl KM5, KM10 clippers
€5,05
Oster Kiwak for Oster Power Pro Ultra Clippers
Original Kiwak for Oster Power Pro Ultra clippers. GroomerShop.pl is an authorized warranty and post-warranty service for Oster clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€10,10
Moser Battery for Moser Arco 1854, 1855 Clippers
Spare battery for Moser clippers 1854, 1855.
€25,22
Aesculap Gear with shaft for Aesculap Bonum clipper
Original gear with shaft for Aesculap Bonum clippers. Designed for the following clipper models: GT654 GT656 GroomerShop.pl is an authorized warranty and post-warranty service for Aesculap clippers intended for animals. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€30,29
Heiniger Screw for Heiniger Clippers M5 x 14
Are you looking for spare/service parts for the Heiniger Xplorer clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Heiniger clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code Name 1 SRV-HG-708-540 Blade head for Heiniger Xplorer clipper 2 SRV-HG-708-160 Pressure adjustment knob cover for Heiniger Xplorer 3 SRV-HG-706-510 Spacer screw for Heiniger Xplorer clipper 4 SRV-HG-707-091 Blade pressure sleeve for Heiniger Xplorer 5 SRV-HG-706-520 Screw for Heiniger Xplorer clippers M5 x 14 6 SRV-HG-708-141 Head housing for Heiniger Xplorer clipper 7 SRV-HG-706-517 Pressure spring for Heiniger Xplorer clippers 8 SRV-HG-706-511 Pressure arm for Heiniger Xplorer 9 SRV-HG-708-507 Blade drive block for Heiniger Xplorer clipper 10 SRV-HG-706-525 Guide screw M3 X 6 for Heiniger Xperience 11 SRV-HG-706-518 Blade leaf springs for Heiniger Xplorer 12 SRV-HG-708-150 Yoke guide for Heiniger Xplorer clipper 13 SRV-HG-706-521 Blade mounting screw for Heiniger Xplorer 14 HG-708-146 Yoke sleeve for Heiniger Xperience/Xplorer 15 SRV-HG-707-088 Ring/seger size 3.73mm for Heiniger Xplorer 16 SRV-HG-706-524 Seeger ring size 6 for Heiniger Xplorer clippers 17 SRV-HG-708-145 Crankshaft for Heiniger Xplorer clippers 18 SRV-HG-708-142 Crank sleeve for Heiniger Xplorer clipper 19 SRV-HG-708-543 Gear for Heiniger Xplorer, 27 teeth 27 SRV-HG-707-882 Rubber feet for Heiniger Xplorer charger 30 SRV-HG-708-430 Upper housing for Heiniger Xplorer clipper 31 SRV-HG-708-061 Switch slider for Heiniger Xplorer 32 SRV-HG-708-461 Switch lock for Heiniger Xplorer 33 SRV-HG-708-450 Lower housing for Heiniger Xplorer clipper 34 SRV-HG-708-510 Front motor handle for Heiniger Xplorer 35 SRV-HG-708-511 Rear motor handle for Heiniger Xplorer 36 HG-708-520 Battery for Heiniger Xplorer clipper 37 SRV-HG-708-480 Electronics/PCB for Heiniger Xplorer 39 SRV-HG-701-711 Screw for Heiniger Xplorer clippers M2.6 x 6 40 SRV-HG-708-440 Housing with switch for Heiniger Xplorer clipper 41 SRV-HG-707-555 Pendant for Heiniger Xplorer clipper 45 HG-708-500 Motor for Heiniger Xplorer clipper 50 SRV-HG-708-550 Charging station for Heiniger Xplorer clipper 51 SRV-HG-708-570 Charger housing for Heiniger Xplorer clipper 52 HG-707-557 Large housing screw (KA 3x16) for Heiniger clippers 53 SRV-HG-708-563 Charger base for Heiniger Xplorer clipper 54 SRV-HG-708-564 LED lighting for Heiniger Xplorer charger 55 SRV-HG-708-560 Charger electronics for Heiniger Xplorer clipper 60 SRV-HG-708-590/EU Charger power supply for Heiniger Xplorer clipper
€0,76
Oster Upper housing for Oster A6 Slim clipper
Original top cover for the Oster A6 Slim clipper in turquoise color.
€26,94 - €30,29
Show Tech Show Tech Experto Cordless Clipper - cordless running clipper with adjustable blade
Thanks to its ergonomic design, lightweight, and rotating motor, the Show Tech Experto dog grooming clipper is easy to handle and enjoyable to use. This model features 5 speed settings, allowing you to adjust the clipping speed to your needs. The clear LCD display shows you the current speed, remaining battery life, and alerts you when it's time to clean the blade. The Experto clipper is equipped with an adjustable stainless steel blade (lower part) and a ceramic insert (upper part) coated with titanium, making the blade extremely sharp and ensuring precision cutting. The ceramic guarantees low heat transfer and reduced friction, enabling longer and faster clipping while minimizing the risk of burns and preventing irritation. The included blade is perfect for fine to medium thickness fur. It will be an ideal ally for detail work. This clipper provides up to 5 hours of operation! In case of a low battery, simply plug in the cable and you can continue working. The modern design of the Experto is sure to appeal to everyone. Technical specifications: power: 7W weight: 272g operating time: up to 5h full charging time: 4h blade width: 45mm total length: 19.5cm rotations: 5000/5500/6000/6500/7000 rpm blade adjustment range: 0.25mm, 0.5mm, 1mm, 1.5mm, 2mm Included: Show Tech Experto clipper adjustable stainless steel blade power cable oil brush user manual
€126,25
Hauptner Hauptner Hand Clipper for Grooming - Cutting Width
Hauptner manual pet clipper, made in Germany. Cutting width: 5.5cm Cutting length: 3mm
€88,35
Heiniger Heiniger Xperience Switch Blocker
Switch block/guide for the Heiniger Xperience clipper. GroomerShop.pl is an authorized warranty and post-warranty service for animal clippers. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€2,53
Oster Kiwak for Oster Golden A5 Clippers
Kiwak for Oster Golden A5 clippers. GroomerShop.pl is an authorized warranty and post-warranty service for Oster clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€3,79
Aesculap Spare parts for Aesculam Econom II clippers - Left yoke sleeve
Looking for spare/service parts for the Aesculap Econom II clipper (GT474)? Make your selection based on the service diagram of the clipper. Tip: Available parts are visible after expanding the list above the Add to Cart button. GroomerShop.pl is an authorized warranty and post-warranty service for Aesculap clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code Name 10 SRV-AE-GT367202 Yoke Arm for Aesculap Econom II Clipper (GT474) 11 SRV-AE-GT367802 Left Yoke Sleeve for Aesculap Econom II Clipper (GT474) 12 SRV-AE-GT367803 Right Yoke Sleeve for Aesculap Econom II Clipper (GT474) 13 SRV-AE-TA004029 O-ring for Aesculap Econom II Clipper (GT474) 14 SRV-AE-TA008542 Filler Ring for Aesculap Econom II Clipper (GT474) 15 SRV-AE-TA008295 Shaft Screw for Aesculap Econom II Clipper (GT474) - SRV-AE-GT374208 Carbon Brush for Aesculap Econom II Clipper (GT474)
€6,31
Heiniger Rotor bearing for Heiniger Delta clipper type 626
Rotor bearing for Heiniger Delta 3 clippers, type 626 (6x19x6 mm) Inner diameter of the bearing - Ø 6 mm GroomerShop.pl is an authorized warranty and post-warranty service for machines designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€7,58
Aesculap Spare parts for Aesculam Econom II clippers - Felt ring
Are you looking for spare/service parts for the Aesculap Econom II clipper (GT474)? Make your selection based on the service diagram of the clipper. Tip: Available parts are visible after expanding the list above the Add to Cart button. GroomerShop.pl is an authorized warranty and post-warranty service for Aesculap clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 10 | SRV-AE-GT367202 | Yoke arm for Aesculap Econom II clipper (GT474) 11 | SRV-AE-GT367802 | Left yoke sleeve for Aesculap Econom II clipper (GT474) 12 | SRV-AE-GT367803 | Right yoke sleeve for Aesculap Econom II clipper (GT474) 13 | SRV-AE-TA004029 | O-ring for Aesculap Econom II clipper (GT474) 14 | SRV-AE-TA008542 | Filler ring for Aesculap Econom II clipper (GT474) 15 | SRV-AE-TA008295 | Shaft screw for Aesculap Econom II clipper (GT474) - | SRV-AE-GT374208 | Carbon brush for Aesculap Econom II clipper (GT474)
€1,26
Heiniger Power cord for Heiniger Handy clippers
Are you looking for spare/service parts for the Heiniger Handy clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Heiniger clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown in the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 | SRV-HG-706-501 | Head casing for Heiniger Handy clipper 2 | SRV-HG-706-503 | Yoke guide for Heiniger Handy clipper 3 | SRV-HG-706-505 | Crank bushing for Heiniger Handy clipper 4 | SRV-HG-706-506 | Crankshaft for Heiniger Handy clippers 5 | HG-706-507 | Yoke block for Heiniger Handy clippers 6 | HG-701-830 | Gear for Heiniger Handy clipper 7 | SRV-HG-706-509 | Blade pressure bushing for Heiniger Handy clipper 8 | SRV-HG-706-510 | Spacer screw for Heiniger Handy clipper 9 | SRV-HG-706-511 | Pressure arm for Heiniger Handy clipper 10 | SRV-HG-706-514 | Yoke bushing for Heiniger Handy clipper 11 | SRV-HG-706-517 | Pressure spring for Heiniger Handy clippers 12 | HG-706-518 | Yoke arm for Heiniger Handy clippers 13 | SRV-HG-706-520 | Screw for Heiniger Handy clippers (M5 x 14) 14 | SRV-HG-706-521 | Blade mounting screw for Heiniger Handy clipper 15 | SRV-HG-706-523 | Screw for Heiniger clippers (M4 X 10) 16 | SRV-HG-706-524 | Circlip size 6 for Heiniger clippers 17 | SRV-HG-706-525 | Guide screw (M3 X 6) for Heiniger clipper 18 | SRV-HG-701-815 | Complete head for Heiniger Handy clipper 19 | SRV-HG-701-824 | Motor casing screw for Heiniger Handy (M3.5 x 6) 20 | SRV-HG-701-803 | Front motor holder for Heiniger Handy clipper 21 | SRV-HG-701-612 | Motor flange gasket for Heiniger Handy 22 | SRV-HG-701-610 | Motor centering flange for Heiniger Handy 23 | SRV-HG-701-638 | Pressure ring for Heiniger Handy clipper 608 24 | SRV-HG-701-636 | Rotor bearing for Heiniger Handy clipper 25 | SRV-HG-701-639 | Retaining ring for Heiniger Handy clippers 26 | SRV-HG-701-808 | Ventilation wheel for Heiniger Handy motor 27 | SRV-HG-701-809 | Rotor for Heiniger Handy clipper 28 | SRV-HG-701-637 | Pressure ring for Heiniger 626 clippers 29 | SRV-HG-701-635 | Rotor bearing for Heiniger Handy clipper 30 | SRV-HG-701-820 | Mounting screw M3x45 for Heiniger Handy clipper 31 | SRV-HG-701-616 | Lock washer M3 for Heiniger Handy 32 | SRV-HG-701-818 | Spacer bushing for Heiniger Handy clipper 33 | SRV-HG-701-817 | Rotor casing for Heiniger Handy clipper 34 | SRV-HG-701-822 | Motor stator for Heiniger Handy clipper 35 | SRV-HG-701-800-21A | Motor casing for Heiniger Handy clipper 36 | SRV-HG-701-633 | Carbon brushes for Heiniger clipper with cover (2x) 37 | SRV-HG-701-634 | Carbon brush cap for Heiniger clipper 38 | SRV-HG-701-640 | Mounting screws for Heiniger Handy M3.5 x 8 39 | SRV-HG-701-645 | Power cable for Heiniger Handy clipper 40 | SRV-HG-701-623 | Cable bend for Heiniger Handy clipper 41 | SRV-HG-701-800-23 | Suspension for Heiniger Handy clipper 42 | SRV-HG-701-867 | Switch casing for Heiniger Handy clipper 43 | SRV-HG-701-621 | Motor screw for Heiniger Handy clipper M3.5 44 | SRV-HG-701-631 | Switch for Heiniger Handy clipper 45 | SRV-HG-701-669 | Capacitor 0.15uF for Heiniger Handy clipper 46 | SRV-HG-701-671 | Cable mounting for Heiniger Handy clipper 47 | SRV-HG-701-619 | Motor clamp for Heiniger Handy clipper 48 | SRV-HG-701-642 | Mounting screw M3 x 25 for Heiniger Handy clipper 49 | SRV-HG-701-627 | Motor cover for Heiniger Handy clipper 50 | SRV-HG-701-605 | Lower switch casing for Heiniger Handy clipper 51 | SRV-HG-701-641 | Casing screw M3X6 for Heiniger Handy clipper 52 | SRV-HG-701-600-30A | Air filter for Heiniger Handy clipper
€20,20
You have seen 360 out of 365 products
