Clippers
Oster O-ring for Oster A6 clipper motor
Are you looking for spare/service parts for the Oster A6 Comfort clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Oster clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 | SRV-O-163302-000 | Upper housing for Oster A6 clipper 2 | SRV-O-163464-000 | Lower housing for Oster A6 clipper 3 | SRV-O-153650-003 | Front cover for Oster A6 clipper 4 | SRV-O-153264-000 | Front cover screws for Oster A6 clipper 5 | SRV-O-153660-000 | Motor for Oster Golden A6 clipper 6 | O-A6-SZCZOTKI | Carbon brushes for Oster A6 clipper 7 | SRV-O-153667-000 | Lever clamp for Oster A6 clipper 8 | O-153674-100 | Lever for Oster Golden A6 clipper 9 | SRV-O-153676-000 | Hanger for Oster Golden A6 clipper 10 | O-44941-000-000 | Blade hinge for Oster Golden A5, Oster A6 11 | O-44938-000-000 | Blade latch for Oster A6 clipper 12 | SRV-O-41664-000 | Hinge screw for Oster A6 clipper 13 | SRV-O-153668-000 | Power supply for Oster Golden A6 clipper 14 | SRV-O-159501-000 | Power cable for Oster Golden A6 clippers 15 | SRV-O-153658-002 | Housing gasket for Oster A6 clipper 16 | SRV-O-153658-001 | Side gaskets for Oster Golden A6 clipper 17 | SRV-O-159822-000 | Housing screw for Oster A6 clipper 18 | SRV-O-163465-000 | PCB electronics for Oster Golden A6 clipper 19 | SRV-O-84026-606 | Mounting screw for Oster Golden A6 clipper 22 | SRV-O-153657-000 | Motor gasket for Oster Golden A6 clipper 23 | SRV-O-159463-000 | Motor O-ring for Oster A6 clipper 24 | SRV-O-153654-000 | Gasket for the cover of Oster Golden A6 clipper
€2,88
Oster Bearing seal for Oster Golden A5 clipper
Are you looking for spare/service parts for the Oster Golden A5 clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Oster clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown in the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 | SRV-O-41664-000 | Blade cover/hinge screw for Oster A5 2 | SRV-O-115286-020 | Front cover for Oster Golden A5 3 | SRV-O-41676-000 | Oiler for Oster Golden A5 4 | SRV-O-42563-000 | Oil wick for Oster Golden A5 6 | O-44946-005-000 | Pivot for Oster Golden A5 7 | O-45515-000 | O-link for Oster Golden A5 8 | SRV-O-41723-000 | Felt grease seal for Oster Golden A5 9 | SRV-O-111012-020 | Brush cover for Oster Golden A5, brown 9 | SRV-O-111012-010 | Brush cover for Oster Golden A5, black 10 | O-42584-025 | Carbon brushes for Oster Golden A5, set of 2 11 | SRV-O-42566-005 | Resistance plate for Oster Golden A5 12 | O-105520-000 | Eccentric (gear) for Oster Golden A5 13 | O-57022-005 | Main housing brown for Oster Golden A5 13 | O-57022-010 | Main housing black for Oster Golden A5 14 | O-58543-000 | Support washer under the eccentric for Oster Golden A5 15 | O-44941-000-000 | Blade hinge for Oster Golden A5, Oster A6 16 | SRV-O-41665-000 | Hinge/cover screw for Oster Golden A5 17 | O-45588-000 | Blade guard for Oster Golden A5 20 | O-42571-000 | Blade pressure bar for Oster 21 | SRV-O-45501 | Blade pressure spring for Oster Golden A5 22 | O-44936-000 | Blade hook for Oster Golden A5 23 | SRV-O-115544-000 | Cover plate for Oster Golden A5 25 | O-42555-000 | Blade screw for Oster A5 26 | SRV-O-57070-000 | Bushing for Oster Golden A5 27 | SRV-O-42568 | Felt washer for Oster Golden A5 29 | SRV-O-58519-000 | Bearing seal for Oster Golden A5 31 | SRV-O-42114-050 | Seal retaining screw for Oster Golden A5 32 | O-84906-005 | Rotor for Oster Golden A5 single-speed 32 | O-84906-000 | Rotor for Oster Golden A5 two-speed 33 | SRV-O-84936-000 | Stator for Oster Golden A5 34 | O-44938-000-000 | Blade latch for Oster Golden A5, A6 35 | SRV-O-42557-000 | Sealing ring for Oster Golden A5 36 | SRV-O-42559 | Spring cap for Oster Golden A5 37 | SRV-O-42562-000 | Rotor spring for Oster Golden A5 38 | SRV-O-58006-000 | Brush holder for Oster Golden A5 42 | SRV-O-42570-000 | Sealing ring for Oster Golden A5 housing 43 | SRV-O-53825-091 | 0.1uF capacitor for Oster Golden A5 44 | O-58357-009 | Switch for Oster Golden A5 single-speed 44 | O-SWITCH2 | Switch for Oster Golden A5 two-speed 46 | O-84177-115 | End housing brown for Oster Golden A5 46 | O-84177-125 | End housing black for Oster Golden A5 47 | SRV-O-41756-000 | Spring washer for Oster Golden A5 48 | SRV-O-42113-015 | Terminal clamp screw for Oster Golden A5 49 | SRV-O-41683 | Switch nut for Oster A5 50 | SRV-O-42614-000 | Brush cap for Oster Golden A5 51 | SRV-O-42573-000 | Clip for Oster Golden A5 52 | SRV-O-42551 | Housing clamp for Golden A5 55 | O-165265-000 | Power cord for Oster Golden A5 62 | SRV-O-42564-000 | Stator wire mounting screw for Oster Golden A5 79 | SRV-O-58355-000 | Terminal holder for Oster Golden A5 80 | SRV-O-111013-070 | Air filter for Oster Golden A5, graphite
€1,15
Oster Oster A6 Slim 3-Speed Clipper - professional three-speed pet grooming clipper - With blade (1.6mm)
Oster A6 Slim is a very solid three-speed clipper. Fully professional, recommended for veterinarians, groomers, and breeders. It operates smoothly and without vibrations, allowing for almost continuous use. A special latch stabilizes the blades, preventing them from wobbling during operation. The clipper features a simple and easy one-button blade exchange system. Now available in a new version with three color options to choose from! Technical specifications: 3 speeds (3100/3600/4100 RPM), high-performance motor, very quiet, does not overheat, innovative drive system, lightweight with an ergonomic slim shape, specially designed vibration dampener absorbs vibrations and noise, minimizing hand fatigue, compatible with A5 blades, cord length: 3.66 m, weight: 367 grams. Included: Oster A6 Slim clipper with a purple housing, choice of blade #10 or #50 (for an additional fee), tube of lubricant for the blades, cleaning brush, instruction manual in Polish. Oster Golden A6 is compatible with blades from: Andis, Oster, Moser, Geib, Aesculap, Wahl, Thrive.
€287,98
Moser Power supply with cable for Moser/Wahl Arco Pro, Genio Pro Wahl Creativa clippers
Power supply with cable for Moser/Wahl Arco Pro, Genio Pro Wahl Creativa clippers. Designed for Moser charging stations (SRV-M-1874-7040), Wahl (SRV-W-1876-7060). Compatible with the following clipper models: Moser Arco, Wahl Super Trim, Wahl Super Groom, Wahl Bravura, Wahl Creativa, Moser Arco Pro, Moser Vetiva Mini, Moser Prima.
€23,04
Andis Andis - rubber bearing ring for AGC, AGC2, AGC2 Super Speed clippers
Rubber bearing ring - large for Andis AGC, AGC2, AGC2 Super Speed clippers. GroomerShop.pl is an authorized warranty and post-warranty service for animal clippers. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€0,86
Andis Motor for Andis Endurance / AGCB Clippers
Are you looking for spare/service parts for the Andis AGCB Super Brushless clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Andis clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown in the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 SRV-A-68359 | Drive cover for Andis AGCB clipper, blue 1 SRV-A-68361 | Drive cover for Andis AGCB clipper, burgundy 1 SRV-A-68362 | Drive cover for Andis AGCB clipper, black 1 SRV-A-200214 | Drive cover for Andis AGCB clipper, lime 1 SRV-A-200944 | Drive cover for Andis AGCB clipper, fuchsia 2 SRV-A-202060 | Upper housing for Andis AGCB clipper, black 2 SRV-A-202058 | Upper housing for Andis AGCB clipper, blue 2 SRV-A-200568 | Upper housing for Andis AGC2, AGCB clippers, burgundy 2 SRV-A-202059 | Upper housing for Andis AGCB clipper, lime 2 SRV-A-200739 | Upper housing for Andis AGC2, AGCB clippers, pink 3 SRV-A-53009 | Switch slider for Andis AGCB clipper, black 3 SRV-A-53013 | Switch slider for Andis AGCB clipper, silver 4 SRV-A-65609 | Lower housing for Andis AGCB clipper, blue 4 SRV-A-200744 | Lower housing for Andis AGC2, AGCB clippers, pink 4 SRV-A-200236 | Lower housing for Andis AGCB clipper, lime 4 SRV-A-200549 | Lower housing for Andis AGCB clipper, black 4 SRV-A-200571 | Lower housing for Andis AGCB clipper, burgundy 4 SRV-A-200952 | Lower housing for Andis AGCB clipper, fuchsia 5 SRV-A-15766 | Pivot screw for Andis clippers 6 SRV-A-20659 | Pivot for Andis AGC, AGC2, AGCB clippers 7 SRV-A-201435 | Front motor housing for Andis AGCB clipper 8 SRV-A-201573 | Motor for Andis Endurance / AGCB clipper 9 SRV-A-200189 | Mounting screw for Andis AGCB clipper 10 SRV-A-65057 | Switch for Andis AGCB clipper 11 SRV-A-65828 | Motor frame screw for AGC, AGC2, AGCB clippers 12 SRV-A-201909 | PCB electronics for Andis AGCB clipper 13 SRV-A-22267 | Suspension for Andis AGC, AGC2, AGCB clippers 14 SRV-A-201666 | Power supply with cable for Andis AGCB clipper 15 SRV-A-64606 | Housing screw for Andis AGC, AGCB 16 SRV-A-64794 | Switch lock for Andis AGCB clipper 17 SRV-A-64535 | Blade hinge washer/plate for Andis AGC, AGCB 18 SRV-A-63897 | Blade hinge for Andis AGC, AGC2, AGCB clippers 19 SRV-A-27864 | Blade hinge screw for Andis AGC, AGCB clippers 20 SRV-A-21255 | Motor frame screw for Andis AGCB clipper 21 SRV-A-60083 | Lubricating gasket for Andis AGC, AGCB clippers 22 SRV-A-21063 | Switch cover for Andis AGCB clipper
€115,18
Heiniger Adjustment Pressure Knob Cover for Heiniger Xplorer, Xperience
Knob cover for pressure adjustment for Heiniger Xplorer, Xperience clippers. GroomerShop.pl is an authorized warranty and post-warranty service for animal clippers. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€3,46
Wahl Electronics/PCB board for Wahl Vetiva clippers
Are you looking for replacement/service parts for the Wahl Super Trim clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Wahl clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code Name 1020 SRV-W-1584-7205 Housing with switch for Wahl Vetiva Mini 1030 SRV-W-1884-7110 Switch button for Wahl Vetiva Mini 1040 SRV-W-1588-7020 Motor for Wahl Vetiva Mini and Moser Li+Pro2 Mini 1050 SRV-W-1584-7115 Electronics/PCB board for Wahl Vetiva Mini 1060 SRV-W-1584-7105 Battery for Wahl Vetiva Mini 1070 SRV-W-1585-7080 Charging station for Wahl Vetiva Mini 1080 W-1590-7050 Spacer attachment for Moser Rex Mini, Prima, Vetiva Mini 3-6mm 1090 SRV-W-1881-7120 Power supply with cable for Wahl Vetiva Mini 1100 SRV-W-1584-7120 Motor support for Wahl Vetiva Mini 1110 SRV-M-1881-7110 Power socket for Wahl Vetiva Mini
€57,58
Oster Felt Seal for Oster Golden A5 Clipper
Felt seal for Oster Golden A5 clippers. GroomerShop.pl is an authorized warranty and post-warranty service for pet grooming clippers. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€0,86
Wahl Wahl KM5 Clipper PCB Electronics
Original electronic PCB board for the Wahl KM5 grooming clipper. GroomerShop.pl is an authorized warranty and post-warranty service for pet grooming machines. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€28,80
Wahl Wahl Replacement Battery - replacement battery for Wahl KM Cordless clippers
Replacement battery for Wahl clippers. Battery capacity: 1200mAh. Battery voltage: 10.8V. Battery type: Lithium-ion (Li-Ion). Part intended for the following clipper models: Wahl KM Cordless Groomer. Shop.pl is an authorized warranty and post-warranty service for pet clippers. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€115,18
Oster Main housing for Oster Golden A5 clipper
Black housing for Oster Golden A5 clippers.
€24,48
Oster Housing screw for Oster A6 clipper
Are you looking for spare/service parts for the Oster A6 Comfort clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Oster clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 | SRV-O-163302-000 | Upper housing for Oster A6 clipper 2 | SRV-O-163464-000 | Lower housing for Oster A6 clipper 3 | SRV-O-153650-003 | Front cover for Oster A6 clipper 4 | SRV-O-153264-000 | Front cover screws for Oster A6 clipper 5 | SRV-O-153660-000 | Motor for Oster Golden A6 clipper 6 | O-A6-SZCZOTKI | Carbon brushes for Oster A6 clipper 7 | SRV-O-153667-000 | Lever clamp for Oster A6 clipper 8 | O-153674-100 | Lever for Oster Golden A6 clipper 9 | SRV-O-153676-000 | Suspension for Oster Golden A6 clipper 10 | O-44941-000-000 | Blade hinge for Oster Golden A5, Oster A6 11 | O-44938-000-000 | Blade latch for Oster A6 clipper 12 | SRV-O-41664-000 | Hinge screw for Oster A6 clipper 13 | SRV-O-153668-000 | Power supply for Oster Golden A6 clipper 14 | SRV-O-159501-000 | Power cable for Oster Golden A6 clippers 15 | SRV-O-153658-002 | Housing gasket for Oster A6 clipper 16 | SRV-O-153658-001 | Side gaskets for Oster Golden A6 clipper 17 | SRV-O-159822-000 | Housing screw for Oster A6 clipper 18 | SRV-O-163465-000 | PCB electronics for Oster Golden A6 clipper 19 | SRV-O-84026-606 | Mounting screw for Oster Golden A6 clipper 22 | SRV-O-153657-000 | Motor gasket for Oster Golden A6 clipper 23 | SRV-O-159463-000 | Motor O-ring for Oster A6 clipper 24 | SRV-O-153654-000 | Gasket for the cover of Oster Golden A6 clipper
€0,86
Heiniger Heiniger Opal 2 - Speed Brushless Clipper - professional, two-speed cordless clipper with blade (0.25mm) and case - batteries included
Opal is the latest model of cordless clippers from the Heiniger brand. Now even more durable and quieter, thanks to the use of a brushless motor. Two speeds allow you to adjust the speed to any type of coat and type of work. The ergonomic and slim design fits perfectly in the hand and ensures maximum comfort during use. The lithium-ion battery with a built-in battery level indicator allows for continuous operation for 4 hours! (The battery has no memory effect, so we can recharge it at any time.) Noticeably quieter than other clippers of this type, Opal enhances the comfort of work for every user and reduces stress for animals. It can handle any type of coat: both thick, woolly undercoats and fine hair. It is compatible with all Snap-On blades available on the market. Comes with a case, a #40 blade (0.25 mm), and accessories. Recommended for pet grooming salons, veterinary clinics, and breeding. Technical specifications of Heiniger Opal: weight of the clipper with blade and battery: 415g, weight of the battery: 127g, speed: 2600/3100 strokes/min, operating time: up to 4h, charging time: 60min, noise level:
€590,38
Aesculap Clamping lever for Aesculap Fav5 CL (GT306), Favorita II (GT104) clippers
Are you looking for replacement/service parts for the Aesculap Fav5 CL (GT306) clipper? Make your selection based on the service diagram of the clipper. Tip: Available parts are visible after expanding the list above the Add to Cart button. GroomerShop.pl is an authorized warranty and post-warranty service for Aesculap clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown in the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 | AE-GT201 | Battery for Aesculap Fav5 CL (GT306) 2 | GT300801 | Lower housing for Aesculap Fav5 CL (GT306) 3 | GT300802 | Upper housing for Aesculap Fav5 CL (GT306) 4 | GT200248 | Power switch button for Aesculap Fav5 CL (GT306) 5 | SRV-AE-GT200245 | Switch guide for Aesculap Fav5 CL (GT306) 6 | SRV-AE-GT200249 | Switch contact for Aesculap Fav5 CL (GT306) 7 | SRV-AE-GT300224 | Felt oil seal for Aesculap Fav5 CL (GT306) 8 | SRV-AE-GT300880 | Rocker for Aesculap Fav5 CL (GT306) 9 | SRV-AE-TA003820 | Locking ring for rocker for Aesculap Fav5 CL (GT306) 10 | SRV-AE-GT104225 | Felt washer for Aesculap Fav5 CL (GT306) 11 | SRV-AE-GT200850 | PCB electronics for Aesculap Fav5 CL (GT306) 12 | GT300890 | Motor for Aesculap Fav5 CL (GT306) 13 | SRV-AE-TA004637 | Gear washer for Aesculap Fav5 CL (GT306) 14 | SRV-AE-TA004663 | Electronics plate screw for Aesculap Fav5 CL (GT306) 15 | SRV-AE-TA013499 | M3x16 housing screw for Aesculap Fav5 CL (GT306) 16 | SRV-AE-GT105415 | Blade hinge for Aesculap Fav5 CL (GT306) 17 | SRV-AE-TA013521 | Motor O-ring for Aesculap Fav5 CL (GT306) - 23x3.6mm 18 | SRV-AE-TA013522 | Motor O-ring for Aesculap Fav5 CL (GT306) - 30x2.65mm 19 | SRV-AE-GT300305 | Rocker cap for Aesculap Fav5 CL (GT306)
€1,44
Heiniger Heiniger Xperience/Xplorer Yoke Sleeve
Heiniger Xperience/Xplorer Jaw Sleeve.
€5,76
Joyzze Joyzze Hornet Cordless Clipper - wireless running clipper with adjustable blade and 3 attachments, champagne
Joyzze Hornet is a quiet and incredibly lightweight pet grooming clipper. It features a built-in lithium-ion battery (no memory effect) that provides up to 240 minutes of continuous operation. Equipped with a powerful, high-speed motor with two speeds: 5000/6000 SPM/MIN (strokes per minute), ensuring that this clipper can handle any type of coat. The ergonomic and slim design allows for comfortable use without hand fatigue, and it is available in three pearl colors to choose from. Included with the clipper, you receive an adjustable stainless steel blade (cutting lengths of 0.5mm, 1.2mm, 1.6mm, 2.0mm, 2.8mm) and a set of three guide combs. Tip! To prevent the blades from overheating and dulling quickly, use oil both before and after grooming (for longer use, apply it during grooming as well). Apply it to the running clipper at the corners of the blade and wait a moment for the oil to spread naturally on the blade. This procedure will significantly extend the life of your blades. Technical specifications: power: 12.5W number of speeds: 2 noise level:
€287,98
Heiniger Head casing for Heniger Xplorer, Xperience clippers
Are you looking for spare/service parts for the Heiniger Xplorer clipper? Make your selection based on the service diagram of the clipper. Tip: Available parts are visible after expanding the list above the "Add to Cart" button. GroomerShop.pl is an authorized warranty and post-warranty service for Heiniger clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown in the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 | SRV-HG-708-540 | Blade head for Heiniger Xplorer clipper 2 | SRV-HG-708-160 | Adjustment knob cover for Heiniger Xplorer 3 | SRV-HG-706-510 | Spacer screw for Heiniger Xplorer clipper 4 | SRV-HG-707-091 | Blade pressure sleeve for Heiniger Xplorer 5 | SRV-HG-706-520 | Screw for Heiniger Xplorer clippers M5 x 14 6 | SRV-HG-708-141 | Head housing for Heiniger Xplorer clipper 7 | SRV-HG-706-517 | Pressure spring for Heiniger Xplorer clippers 8 | SRV-HG-706-511 | Pressure arm for Heiniger Xplorer 9 | HG-706-507 | Yoke block for Heiniger Xplorer clippers 10 | SRV-HG-706-525 | Guide screw M3 X 6 for Heiniger Xperience 11 | HG-706-518 | Arm/plate yoke for Heiniger Xplorer clippers 12 | SRV-HG-708-150 | Yoke guide for Heiniger Xplorer clipper 13 | SRV-HG-706-521 | Blade mounting screw for Heiniger Xplorer 14 | HG-708-146 | Yoke sleeve for Heiniger Xperience/Xplorer 15 | SRV-HG-707-088 | Ring/seger size 3.73mm for Heiniger Xplorer 16 | SRV-HG-706-524 | Seger ring size 6 for Heiniger Xplorer clippers 17 | SRV-HG-708-145 | Crankshaft for Heiniger Xplorer clippers 18 | SRV-HG-708-142 | Crank sleeve for Heiniger Xplorer clipper 19 | SRV-HG-708-543 | Gear for Heiniger Xplorer, 27 teeth 27 | SRV-HG-707-882 | Rubber feet for Heiniger Xplorer charger 30 | SRV-HG-708-430 | Upper housing for Heiniger Xplorer clipper 31 | SRV-HG-708-061 | Switch slider for Heiniger Xplorer 32 | SRV-HG-708-461 | Switch lock for Heiniger Xplorer 33 | SRV-HG-708-450 | Lower housing for Heiniger Xplorer clipper 34 | SRV-HG-708-510 | Front motor holder for Heiniger Xplorer 35 | SRV-HG-708-511 | Rear motor holder for Heiniger Xplorer 36 | HG-708-520 | Battery for Heiniger Xplorer clipper 37 | SRV-HG-708-480 | Electronics/PCB board for Heiniger Xplorer 39 | SRV-HG-701-711 | Screw for Heiniger Xplorer clippers M2.6 x 6 40 | SRV-HG-708-440 | Housing with switch for Heiniger Xplorer clipper 41 | SRV-HG-707-555 | Hanging device for Heiniger Xplorer clipper 45 | HG-708-500 | Motor for Heiniger Xplorer clipper 50 | SRV-HG-708-550 | Charging station for Heiniger Xplorer clipper 51 | SRV-HG-708-570 | Charger housing for Heiniger Xplorer clipper 52 | HG-707-557 | Large housing screw (KA 3x16) for Heiniger clippers 53 | SRV-HG-708-563 | Charger base for Heiniger Xplorer clipper 54 | SRV-HG-708-564 | LED lighting for Heiniger Xplorer charger 55 | SRV-HG-708-560 | Charger electronics for Heiniger Xplorer clipper 60 | SRV-HG-708-590/EU | Charger power supply for Heiniger Xplorer clipper
€86,38
Heiniger Heiniger - electronic device for Saphir clipper
Electronics for the Heiniger Saphir clipper.
€31,68
Heiniger Heiniger Opal Clipper Motor
Are you looking for spare/service parts for the Heiniger Opal clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Heiniger clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code Name 1 - Upper housing for the Heiniger Opal model 2 - Lower housing for the Heiniger Opal model 3 HG-709-100 Battery for the Heiniger Opal clipper 4 SRV-HG-709-090 Motor for the Heiniger Opal clipper 5 SRV-HG-709-132 Front motor holder for the Heiniger Opal clipper 6 - Rear motor holder for the Heiniger Opal clipper 7 SRV-HG-709-080 Electronic board for the Heiniger Opal model 8 HG-709-130 Rocker for the Heiniger Opal clipper
€86,38
Aesculap Rotor bearing for Aesculap Favorita II clipper (GT104)
Are you looking for spare/service parts for the Aesculap Favorita II (GT104) clipper? Make your selection based on the service diagram of the clipper. Tip: Available parts are visible after expanding the list above the "Add to Cart" button. GroomerShop.pl is an authorized warranty and post-warranty service for Aesculap clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown in the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 | GT104850 | PCB board for Aesculap Favorita II (GT104) 2 | SRV-AE-TA004663 | Electronics board screw for Aesculap Favorita II (GT104) 3 | SRV-AE-GT104614 | Carbon brush for Aesculap Favorita II (GT104) 4 | SRV-AE-GT104319 | Rear bearing cover for Aesculap Favorita II (GT104) 5a | SRV-AE-TA004631 | 16x5mm bearing for Aesculap Favorita II (GT104) 6 | GT104865 | Rotor for Aesculap Favorita II (GT104) 7 | SRV-AE-GT104320 | Front bearing cover for Aesculap Favorita II (GT104) 8 | SRV-AE-TA013499 | M3x16 housing screw for Aesculap Favorita II (GT104) 9 | GT104801 | Lower extension for Aesculap Favorita II (GT104) 10 | SRV-AE-TA004691 | Original switch/button for Aesculap Favorita II (GT104) - single speed 11 | SRV-AE-GT104249 | Rubber switch cover for Aesculap Favorita II (GT104) 12 | SRV-AE-GT300224 | Felt oil seal for Aesculap Favorita II (GT104) 13 | GT104217 | Rocker spring for Aesculap Favorita II (GT104) 14 | SRV-AE-GT104316 | Lever clamp for Aesculap Favorita II (GT104) 15 | SRV-AE-TA004639 | Blade guide screw for Aesculap Favorita II (GT104) 16 | GT104415 | Blade bed for Aesculap Favorita II (GT104) 17 | SRV-AE-GT104225 | Felt washer for Aesculap Favorita II (GT104) 18 | SRV-AE-GT104808 | Rocker for Aesculap Favorita II (GT104) 19 | SRV-AE-TA003820 | Rocker locking ring for Aesculap Favorita II (GT104) 20 | SRV-AE-TA004637 | Gear wheel washer for Aesculap Favorita II (GT104) 21 | SRV-AE-GT104840 | Gear wheel for Aesculap Favorita II (GT104) 22 | SRV-AE-GT104244 | Rocker bushing for Aesculap Favorita II (GT104) 23 | GT104213 | Cable clamp for Aesculap Favorita II (GT104) 24 | TA003537 | Cable clamp screw for Aesculap Favorita II (GT104) 25 | SRV-AE-GT104227 | Pendant/holder for Aesculap Favorita II (GT104) 26 | SRV-AE-TA013520 | Original, replaceable power cord for Aesculap Favorita II (GT104) 27 | SRV-AE-GT105326 | Cable cover for Aesculap Favorita II (GT104)
€8,64
Heiniger Air filter for Heiniger Xperience clippers
Original air filter for Heiniger horse clippers from the X series. Designed for the following clipper models: Heiniger Xpert 1-speed / 2-speed Heiniger Xperience / 2-speed GroomerShop.pl is an authorized warranty and post-warranty service for animal clippers. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€5,76
Wahl Engine bracket for Wahl KM5 clipper
Are you looking for spare/service parts for the Wahl KM5 clipper? Make your selection based on the service diagram of the clipper. Tip: Available parts are visible after expanding the list above the Add to Cart button. GroomerShop.pl is an authorized warranty and post-warranty service for Wahl clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 0010 | SRV-W-1260-7040 | Housing for Wahl KM5 clipper 0020 | SRV-M-1250-7020 | Screw set for Wahl KM5 model 0030 | SRV-M-1250-7000 | Pivot for Wahl KM5 clipper 0040 | SRV-M-1250-7040 | Motor bracket for Wahl KM5 clipper 0050 | SRV-M-1250-7070 | Motor for Wahl KM5 clipper 0060 | SRV-W-1260-7020 | PCB electronics for Wahl KM5 clipper 0070 | SRV-M-1245-7030 | Blade hinge for Wahl KM5 clipper - | SRV-M-1225-7180 | Blade hook for Wahl KM5 clipper 0080 | W-1260-7010 | Blade latch for Wahl KM5 model 0090 | W-1260-7000 | Power supply with 4m cable for Wahl KM5 0100 | SRV-M-1250-7080 | Clip for Wahl KM5 clipper - | SRV-M-1221-7510 | Snap-On blade screw for Wahl KM5 - | SRV-M-1245-7005 | Blade pressure spring for Wahl KM5
€5,76
Wahl Wahl Wetiva Clipper Motor
Are you looking for spare/service parts for the Wahl Super Trim clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Wahl clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown in the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1020 | SRV-W-1584-7205 | Housing with switch for Wahl Vetiva Mini 1030 | SRV-W-1884-7110 | Switch button for Wahl Vetiva Mini 1040 | SRV-W-1588-7020 | Motor for Wahl Vetiva Mini and Moser Li+Pro2 Mini 1050 | SRV-W-1584-7115 | Electronics/PCB board for Wahl Vetiva Mini 1060 | SRV-W-1584-7105 | Battery for Wahl Vetiva Mini 1070 | SRV-W-1585-7080 | Charging station for Wahl Vetiva Mini 1080 | W-1590-7050 | Spacer attachment for Moser Rex Mini, Prima, Vetiva Mini 3-6mm 1090 | SRV-W-1881-7120 | Power supply with cable for Wahl Vetiva Mini 1100 | SRV-W-1584-7120 | Motor bracket for Wahl Vetiva Mini 1110 | SRV-M-1881-7110 | Power socket for Wahl Vetiva Mini
€20,16
Wahl Wahl Pico - wireless dog paw trimmer, battery-operated, finishing clipper
Wahl Pico Pink is the ideal clipper for trimming the face, paws, ears, finishing touches, and touch-ups, for example, at dog shows. The clipper features a new, quiet drive. Its ergonomic design ensures high comfort during use. This model, with its narrow and sleek cutting head, is perfect for cutting hair in hard-to-reach areas, such as between a dog's paw pads or around the face. Powered by readily available AA batteries, this clipper is independent at any time. Technical specifications of the Wahl Pico Pink dog paw and detail trimmer: dimensions: 10.5 x 4.2 x 3.2 cm weight: 74.5 g Standard equipment: Wahl Pico Pink clipper, 22mm wide blade, 0.4mm hair cutting, blade guard, oil bottle, two comb attachments (3mm and 4.5mm), cleaning brush, AA battery, user manual.
€17,26
Heiniger Heiniger X-Series Drive Shaft Sleeve for Horse Clippers
Crankshaft bushing designed for Heiniger machines from the X series. Heiniger Xplorer Heiniger Xperience GroomerShop.pl is an authorized warranty and post-warranty service for Heiniger machines intended for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown in the diagram, please contact us, and we will verify the possibility of ordering it.
€20,16
Heiniger Guide Screw M3 X for Heiniger Xperience, Progress
Are you looking for spare/service parts for the Heiniger Xplorer clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Heiniger clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown in the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 | SRV-HG-708-540 | Blade head for Heiniger Xplorer clipper 2 | SRV-HG-708-160 | Adjustment knob cover for Heiniger Xplorer 3 | SRV-HG-706-510 | Spacer screw for Heiniger Xplorer clipper 4 | SRV-HG-707-091 | Blade pressure sleeve for Heiniger Xplorer 5 | SRV-HG-706-520 | Screw for Heiniger Xplorer clippers M5 x 14 6 | SRV-HG-708-141 | Head housing for Heiniger Xplorer clipper 7 | SRV-HG-706-517 | Pressure spring for Heiniger Xplorer clippers 8 | SRV-HG-706-511 | Pressure arm for Heiniger Xplorer 9 | SRV-HG-708-507 | Blade drive block for Heiniger Xplorer clipper 10 | SRV-HG-706-525 | Guide screw M3 X 6 for Heiniger Xperience 11 | SRV-HG-706-518 | Blade leaf springs for Heiniger Xplorer 12 | SRV-HG-708-150 | Yoke guide for Heiniger Xplorer clipper 13 | SRV-HG-706-521 | Blade mounting screw for Heiniger Xplorer 14 | HG-708-146 | Yoke sleeve for Heiniger Xperience/Xplorer 15 | SRV-HG-707-088 | Ring/seger size 3.73mm for Heiniger Xplorer 16 | SRV-HG-706-524 | Seger ring size 6 for Heiniger Xplorer clippers 17 | SRV-HG-708-145 | Crankshaft for Heiniger Xplorer clippers 18 | SRV-HG-708-142 | Crank sleeve for Heiniger Xplorer clipper 19 | SRV-HG-708-543 | Gear for Heiniger Xplorer, 27 teeth 27 | SRV-HG-707-882 | Rubber feet for Heiniger Xplorer charger 30 | SRV-HG-708-430 | Upper housing for Heiniger Xplorer clipper 31 | SRV-HG-708-061 | Switch slider for Heiniger Xplorer 32 | SRV-HG-708-461 | Switch lock for Heiniger Xplorer 33 | SRV-HG-708-450 | Lower housing for Heiniger Xplorer clipper 34 | SRV-HG-708-510 | Front motor handle for Heiniger Xplorer 35 | SRV-HG-708-511 | Rear motor handle for Heiniger Xplorer 36 | HG-708-520 | Battery for Heiniger Xplorer clipper 37 | SRV-HG-708-480 | Electronics/PCB for Heiniger Xplorer 39 | SRV-HG-701-711 | Screw for Heiniger Xplorer clippers M2.6 x 6 40 | SRV-HG-708-440 | Housing with switch for Heiniger Xplorer clipper 41 | SRV-HG-707-555 | Pendant for Heiniger Xplorer clipper 45 | HG-708-500 | Motor for Heiniger Xplorer clipper 50 | SRV-HG-708-550 | Charging station for Heiniger Xplorer clipper 51 | SRV-HG-708-570 | Charger housing for Heiniger Xplorer clipper 52 | HG-707-557 | Large housing screw (KA 3x16) for Heiniger clippers 53 | SRV-HG-708-563 | Charger base for Heiniger Xplorer clipper 54 | SRV-HG-708-564 | LED lighting for Heiniger Xplorer charger 55 | SRV-HG-708-560 | Charger electronics for Heiniger Xplorer clipper 60 | SRV-HG-708-590/EU | Charger power supply for Heiniger Xplorer clipper
€1,44
Andis Andis Nylon Brush for Cleaning Blades and Clippers
Amazing 4 mini brush by Andis for cleaning blades and clippers. The soft nylon bristles thoroughly clean the item being cleaned. Color: black.
€5,76
Heiniger Heiniger Saphir Cord Vet - professional corded pet grooming clipper with a blade (0.25mm)
Heiniger Saphir Cord Vet is a professional corded clipper for animal grooming. This modern, high-quality Swiss clipper is quiet and lightweight. The powerful yet quiet motor makes grooming a pleasure and allows for work with even the most noise-sensitive animals. The clipper is very light and does not vibrate during operation. The single-speed, rotary motor with a power of 35W does not overheat and can operate continuously for long periods. The motor speed on the first setting is 3200 RPM. The clipper is completely maintenance-free, meaning it does not require lubrication or oiling of any internal components. The device has an ergonomic, impact-resistant housing. Additionally, the switch with a lock prevents accidental activation, making it easy to operate. The clipper comes factory-equipped with a size 40 blade (cutting length 0.25 mm) made of exceptionally durable steel. The Heiniger Saphir Cord is compatible with Snap-On blades from brands such as Oster, Andis, Moser, Wahl, Heiniger, and others. Technical specifications: Motor: 35W Speed: 3200 RPM Power supply: 230V, 50-60Hz Cord length: 3.2m Made in Switzerland Includes blade size 40 (0.25mm)
€300,94
Andis Andis - Lithium-Ion Battery for RBC Pulse Ion Clipper
Lithium-ion battery for Andis RBC Pulse Ion clipper.
€5,76
Oster Oster Golden A5 Sealing Ring
Are you looking for spare/service parts for the Oster Golden A5 clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Oster clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 | SRV-O-41664-000 | Blade cover/hinge screw for Oster A5 2 | SRV-O-115286-020 | Front cover for Oster Golden A5 3 | SRV-O-41676-000 | Oiler for Oster Golden A5 4 | SRV-O-42563-000 | Oil wick for Oster Golden A5 6 | O-44946-005-000 | Rocker for Oster Golden A5 7 | O-45515-000 | O-link for Oster Golden A5 8 | SRV-O-41723-000 | Felt grease seal for Oster Golden A5 9 | SRV-O-111012-020 | Brush cover for Oster Golden A5, brown 9 | SRV-O-111012-010 | Brush cover for Oster Golden A5, black 10 | O-42584-025 | Carbon brushes for Oster Golden A5, set of 2 11 | SRV-O-42566-005 | Resistance plate for Oster Golden A5 12 | O-105520-000 | Eccentric (gear wheel) for Oster Golden A5 13 | O-57022-005 | Main housing brown for Oster Golden A5 13 | O-57022-010 | Main housing black for Oster Golden A5 14 | O-58543-000 | Support washer under the eccentric for Oster Golden A5 15 | O-44941-000-000 | Blade hinge for Oster Golden A5, Oster A6 16 | SRV-O-41665-000 | Hinge/cover screw for Oster Golden A5 17 | O-45588-000 | Blade guard for Oster Golden A5 20 | O-42571-000 | Blade pressure bar for Oster 21 | SRV-O-45501 | Blade pressure spring for Oster Golden A5 22 | O-44936-000 | Blade hook for Oster Golden A5 23 | SRV-O-115544-000 | Cover plate for Oster Golden A5 25 | O-42555-000 | Blade screw for Oster A5 26 | SRV-O-57070-000 | Bearing for Oster Golden A5 27 | SRV-O-42568 | Felt washer for Oster Golden A5 29 | SRV-O-58519-000 | Bearing seal for Oster Golden A5 31 | SRV-O-42114-050 | Screw for sealing element Oster Golden A5 32 | O-84906-005 | Rotor for Oster Golden A5 single-speed 32 | O-84906-000 | Rotor for Oster Golden A5 two-speed 33 | SRV-O-84936-000 | Stator for Oster Golden A5 34 | O-44938-000-000 | Blade latch for Oster Golden A5, A6 35 | SRV-O-42557-000 | Sealing ring for Oster Golden A5 36 | SRV-O-42559 | Spring cap for Oster Golden A5 37 | SRV-O-42562-000 | Rotor spring for Oster Golden A5 38 | SRV-O-58006-000 | Brush holder for Oster Golden A5 42 | SRV-O-42570-000 | Sealing ring for Oster Golden A5 housing 43 | SRV-O-53825-091 | 0.1uF capacitor for Oster Golden A5 44 | O-58357-009 | Switch for Oster Golden A5 single-speed 44 | O-SWITCH2 | Switch for Oster Golden A5 two-speed 46 | O-84177-115 | End housing brown for Oster Golden A5 46 | O-84177-125 | End housing black for Oster Golden A5 47 | SRV-O-41756-000 | Spring washer for Oster Golden A5 48 | SRV-O-42113-015 | Terminal clamp screw for Oster Golden A5 49 | SRV-O-41683 | Switch nut for Oster A5 50 | SRV-O-42614-000 | Brush cap for Oster Golden A5 51 | SRV-O-42573-000 | Clip for Oster Golden A5 52 | SRV-O-42551 | Housing clamp for Golden A5 55 | O-165265-000 | Power cord for Oster Golden A5 62 | SRV-O-42564-000 | Screw for securing stator wires to Oster Golden A5 79 | SRV-O-58355-000 | Terminal holder for Oster Golden A5 80 | SRV-O-111013-070 | Air filter for Oster Golden A5, graphite
€2,02
Andis Andis AGCB Super Brushless - quiet, professional clipper with a brushless motor, blade, and attachment set - Blue
Professional, two-speed corded clipper for grooming animals. It is one of the quietest corded clippers available on the market. Equipped with a next-generation brushless motor, it is several times more durable and over 30% lighter than the previous model, Andis AGC 2 Super. The 36W brushless motor features high power and torque, making it excellent for even the thickest and matted fur. It guarantees efficiency and a very long lifespan. The Andis AGC 2 Super Brushless is suitable for grooming all breeds of dogs, cats, and finishing work on horses. A wide selection of blades makes it a powerful ally for groomers, veterinarians, and breeders. It operates quietly and without vibrations, does not overheat, and can work continuously. The ergonomic and lightweight housing fits well in the hand, while the switch with a lock prevents accidental shutdown, making it easy to use. The clipper is completely maintenance-free - it does not require lubrication of internal moving parts. Available in five color variants. Equipped with Constant Speed technology, which means the clipper will not slow down while cutting through matted and tangled fur. It features two speeds (3000 and 3800 strokes per minute), with the first speed suitable for most grooming tasks, and the second with increased RPM for working with difficult and demanding fur. The clipper blade can be attached in seconds, using the Snap-on (also known as Clip-On) attachment system - the most popular blade attachment system on the market. Included is the Andis CeramicEdge #10 blade of the latest generation with a ceramic cutting element, cutting length of 1.5 mm, and additionally four plastic attachment combs for cutting lengths of 3, 6, 9, and 12 mm. Interesting fact: Carbon brushes used in traditional motors wear out after about 600-800 hours of operation. Brushless motors can operate for up to 8000 hours (10 times longer) than traditional brushed motors. They are also lighter, more environmentally friendly (do not emit carbon dust), and safer - powered by low voltage 24V, eliminating high voltage from the power cord and clipper. The clipper is compatible with Snap-On blades from brands: Andis, Oster, Moser, Wahl, Aesculap, Heiniger, Geib, Thrive. Included in the set: Andis AGC2 Super Brushless clipper, CeramicEdge #10 blade cutting at 1.5 mm, set of 4 plastic attachment combs, tube of oil for the blades, spare drive (transfers power from the motor to the blade), user manual in Polish, warranty card for a period of 12 months.
€282,22
Oster Oster Golden A5 Seal Screw
Looking for spare/service parts for the Oster Golden A5 clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Oster clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 | SRV-O-41664-000 | Blade cover/hinge screw for Oster A5 2 | SRV-O-115286-020 | Front cover for Oster Golden A5 3 | SRV-O-41676-000 | Oil dispenser for Oster Golden A5 4 | SRV-O-42563-000 | Oil wick for Oster Golden A5 6 | O-44946-005-000 | Rocker for Oster Golden A5 7 | O-45515-000 | O-link for Oster Golden A5 8 | SRV-O-41723-000 | Felt grease seal for Oster Golden A5 9 | SRV-O-111012-020 | Brush cover for Oster Golden A5, brown 9 | SRV-O-111012-010 | Brush cover for Oster Golden A5, black 10 | O-42584-025 | Carbon brushes for Oster Golden A5, set of 2 11 | SRV-O-42566-005 | Stop plate for Oster Golden A5 12 | O-105520-000 | Cam (gear) for Oster Golden A5 13 | O-57022-005 | Main housing brown for Oster Golden A5 13 | O-57022-010 | Main housing black for Oster Golden A5 14 | O-58543-000 | Support washer under the cam for Oster Golden A5 15 | O-44941-000-000 | Blade hinge for Oster Golden A5, Oster A6 16 | SRV-O-41665-000 | Hinge/cover screw for Oster Golden A5 17 | O-45588-000 | Blade guard for Oster Golden A5 20 | O-42571-000 | Blade pressure bar for Oster 21 | SRV-O-45501 | Blade pressure spring for Oster Golden A5 22 | O-44936-000 | Blade hook for Oster Golden A5 23 | SRV-O-115544-000 | Cover plate for Oster Golden A5 25 | O-42555-000 | Blade screw for Oster A5 26 | SRV-O-57070-000 | Bushing for Oster Golden A5 27 | SRV-O-42568 | Felt washer for Oster Golden A5 29 | SRV-O-58519-000 | Bearing seal for Oster Golden A5 31 | SRV-O-42114-050 | Seal screw for Oster Golden A5 32 | O-84906-005 | Rotor for Oster Golden A5 single-speed 32 | O-84906-000 | Rotor for Oster Golden A5 two-speed 33 | SRV-O-84936-000 | Stator for Oster Golden A5 34 | O-44938-000-000 | Blade latch for Oster Golden A5, A6 35 | SRV-O-42557-000 | Sealing ring for Oster Golden A5 36 | SRV-O-42559 | Spring cap for Oster Golden A5 37 | SRV-O-42562-000 | Rotor spring for Oster Golden A5 38 | SRV-O-58006-000 | Brush holder for Oster Golden A5 42 | SRV-O-42570-000 | Sealing ring for Oster Golden A5 housing 43 | SRV-O-53825-091 | Capacitor 0.1uF for Oster Golden A5 44 | O-58357-009 | Switch for Oster Golden A5 single-speed 44 | O-SWITCH2 | Switch for Oster Golden A5 two-speed 46 | O-84177-115 | End housing brown for Oster Golden A5 46 | O-84177-125 | End housing black for Oster Golden A5 47 | SRV-O-41756-000 | Spring washer for Oster Golden A5 48 | SRV-O-42113-015 | Terminal clamp screw for Oster Golden A5 49 | SRV-O-41683 | Switch nut for Oster A5 50 | SRV-O-42614-000 | Brush cap for Oster Golden A5 51 | SRV-O-42573-000 | Suspension for Oster Golden A5 52 | SRV-O-42551 | Housing clamp for Golden A5 clipper 55 | O-165265-000 | Power cord for Oster Golden A5 62 | SRV-O-42564-000 | Stator wire securing screw for Oster Golden A5 79 | SRV-O-58355-000 | Terminal holder for Oster Golden A5 80 | SRV-O-111013-070 | Air filter for Oster Golden A5, graphite
€0,86
Andis Motor Mount Assembly - Engine Mounting Element for Andis D - 4D/D Clippers
Complete engine mounting kit designed for Andis clippers. The kit includes: engine housing, mounting elements, and mounting screws. Intended for Andis models D-4D / D-5. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€2,88
Heiniger Heiniger Saphir Machine Pad 4x0.5
Are you looking for spare/service parts for the Heiniger Saphir clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Heiniger clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown in the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 SRV-HG-707-831 | Housing for Heiniger Saphir clipper 2 HG-707-771 | Battery for Heiniger Saphir clipper 3 HG-707-800-21 | Motor for Heiniger Saphir clippers 4 HG-707-833 | PCB Electronics for Heiniger Saphir clippers 5 HG-707-855 | Rubber seal for Heiniger Saphir clipper 6 HG-707-847 | Rocker for Heiniger Saphir clippers 7 HG-707-848 | Rocker seal for Heiniger Saphir clipper 8 SRV-HG-707-856 | Seeger ring Ø 3.2 for Heiniger Saphir clipper 9 SRV-HG-707-886 | Washer Ø 4x0.5 for Heiniger Saphir clipper 10 HG-707-800-20 | Gear with ball bearing for Heiniger Saphir clipper 11 HG-707-557 | Large housing screw (KA 3x16) for Heiniger Saphir clipper 12 HG-707-854 | Blade hinge for Heiniger Saphir clipper 13 HG-707-800-25/A | Blade latch for Heiniger Saphir clippers 14 SRV-HG-707-846 | Small housing screw (KA 30x8) for Heiniger Saphir clipper 15 SRV-HG-707-891 | Blade pressure spring for Heiniger Saphir clipper 16 SRV-HG-707-892 | Blade guide for Heiniger Saphir clipper 17 SRV-HG-707-890 | Blade hook for Heiniger Saphir clipper 18 SRV-HG-707-893 | Mounting screw 3.5x4mm for Heiniger Saphir clipper 19 SRV-HG-707-827 | Charger PCB electronics for Heiniger Saphir clipper 20 SRV-HG-707-668.EU | Charger power supply for Heiniger Saphir clipper 21 SRV-HG-707-822 | Charging station for Heiniger Saphir clipper 22 HG-707-720 | Mains power supply for Heiniger Saphir clippers
€1,44
Oster Oster Cleaning Brush for Clippers and Blades
Small plastic brush for cleaning clippers and blades. Its small size allows it to reach every nook and cranny of the clipper/blade. Perfect for collecting trapped fur.
€1,44
You have seen 252 out of 375 products
